Publicité
1
2
3
1. Compression damping force adjusting screw
2. Position indicator mark
1. Vis de réglage de la force d'amortissement à la compression
2. Repère d'indication de position
1. Tornillo de ajuste de la compresión
2. Marca de posición
a
b
3. Match mark
3. Repère d'alignement
3. Marca de coincidencia
Compression damping force
Turn the compression damping force adjusting
screw in direction a to increase the compression
damping force and thereby harden the damping,
and in direction b to decrease the compression
damping force and thereby soften the damping.
Compression damping setting:
Minimum (soft):
12 click(s) in direction b*
Standard:
7 click(s) in direction b*
Maximum (hard):
2 click(s) in direction b*
* With the adjusting screw fully turned in
direction a
TIP
Make sure that the position indicator mark is
aligned with the match mark when the shock ab-
sorber assembly is set to the standard setting.
4-75
Publicité
