Publicité
1. Drive select lever
3. H (High-range)
5. R (Reverse)
1. Sélecteur de marche
3. H (gamme haute)
5. R (marche arrière)
1. Palanca de selección de marcha
3. H (marcha larga)
5. R (marcha atrás)
2
1
3
4
5
2. L (Low-range)
4. N (Neutral)
2. L (gamme basse)
4. N (point mort)
2. L (marcha corta)
4. N (punto muerto)
Shifting: neutral to reverse
WARNING
Before you shift into reverse, make sure there
are no obstacles or people behind you. When it
is safe to proceed, go slowly. Hitting an obsta-
cle or person could result in serious injury or
death.
1. Stop the vehicle. Take your foot off the accel-
erator pedal and check behind you.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice versa by
moving the drive select lever along the shift
guide.
G
When in reverse, the reverse indicator
light should be on. Due to the synchroniz-
ing mechanism in the engine, the light
may not come on until the vehicle starts
moving.
G
If the light does not come on, ask a
Yamaha dealer to inspect the reverse in-
dicator light electrical circuit.
6-15
Publicité
