Publicité
b
1. Rebound damping force adjusting screw
2. Position indicator mark
1. Vis de réglage de la force d'amortissement à la détente
2. Repère d'indication de position
1. Tornillo de ajuste de la extensión
2. Indicador de posición
1
2
a
3
3. Match mark
3. Repère d'alignement
3. Marca de coincidencia
Rebound damping force
Turn the rebound damping force adjusting screw
in direction a to increase the rebound damping
force and thereby harden the damping, and in di-
rection b to decrease the rebound damping force
and thereby soften the damping.
Rebound damping setting:
Minimum (soft):
20 click(s) in direction b*
Standard:
12 click(s) in direction b*
Maximum (hard):
3 click(s) in direction b*
* With the adjusting screw fully turned in
direction a
TIP
Make sure that the position indicator mark is
aligned with the match mark when the shock ab-
sorber assembly is set to the standard setting.
4-73
Publicité
