Publicité
1. Final gear case guard
1. Protège-carter de carter de couple conique
2. Vis et entretoise (× 7)
1. Protección de la caja del engranaje final
2. Perno y casquillo (× 7)
1
2
1. Final gear oil drain bolt
1. Vis de vidange d'huile de couple conique arrière
2. Joint
1. Tornillo de vaciado de aceite de la transmisión final
2. Junta
2
1
2
2. Bolt and collar (× 7)
2. Gasket
Changing the final gear oil
1. Park the vehicle on a level surface.
2. Remove the final gear case guard by remov-
ing the bolts and the collars.
3. Place an oil pan under the final gear case to
collect the used oil.
4. Remove the final gear oil filler bolt and its
O-ring, the final gear oil drain bolt and its gas-
ket to drain the oil.
5. Reinstall the drain bolt and its new gasket,
and then tighten the bolt to the specified
torque.
Tightening torque:
Final gear oil drain bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
8-41
Publicité
