Publicité
1. Final gear oil filler bolt
3. Final gear oil
1. Vis de remplissage de l'huile de couple conique arrière
2. Joint torique
4. Niveau d'huile correct
1. Perno de llenado de aceite de la transmisión final
2. Junta tórica
4. Nivel de aceite correcto
2
1
3
4
2. O-ring
4. Correct oil level
3. Huile de couple conique arrière
3. Aceite de la transmisión final
Final gear oil
Checking the final gear oil level
1. Park the vehicle on a level surface.
2. Remove the final gear oil filler bolt and its
O-ring, and then check the oil level in the final
gear case. The oil level should be at the brim
of the filler hole.
3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended type to
raise it to the correct level. NOTICE: Be sure
no foreign material enters the final gear
case.
4. Reinstall the oil filler bolt and its new O-ring,
and then tighten the bolt to the specified
torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
8-39
5B410013
Publicité
