Publicité
1. Jumper cable positive lead
1. Câble de démarrage positif
1. Cable auxiliar positivo
However, if the vehicle must be jump-started, pro-
ceed as follows.
1. Turn the key to "OFF".
2. Open the hood. (See pages 8-17–8-19 for
hood opening and closing procedures.)
3. Remove the battery compartment cover.
(See pages 8-123–8-127 for battery compart-
1
ment cover removal and installation proce-
dures.)
4. Remove the console. (See pages 8-21–8-23
for console removal and installation proce-
dures.)
5. Using a charged 12-volt battery, connect the
positive lead of the jumper cable to the posi-
tive terminal of the battery in the vehicle and
the other end of the positive lead to the posi-
tive terminal of the charged battery.
8-133
Publicité
