Publicité
Les langues disponibles
Les langues disponibles
2
Connect the required modules, patient cables, and sensors.
3
Check that the patient cables and sensors are correctly connected.
4
Check that the patient settings, such as Patient Type, NIBP measuring mode are appropriate to your
patient.
Refer to the corresponding Section for details of how to perform the measurements you require.
3.3 Turning the Monitor Off
To disconnect the monitor from the power, follow this procedure:
1.
Confirm that patient monitoring is complete.
2.
Disconnect patient cables and sensors from the patient.
3.
Make sure to save or clear the monitoring data as required.
4.
Press the Power on/off key on the front panel to turn off the monitor.
Caution
Although not recommended, you can press and hold the Power on/off key for 10 seconds
to forcibly shut down the monitor when it does not follow a normal shut down. Please note
that this may result in the loss of data from the monitor.
3.4 Using Keys
3.4.1 Shortcut Key
View Settings Key: in view displaying screen (when there is no pop-up window on the
⚫
screen), press this key, then the current View Settings window pops up on the screen. On setting a
specific parameter, pressing the navigation knob, and pressing View Settings window, then the
shortcut keyboard pops up on the screen.
Alarm Reset Key: when alarm event occurs, press this key to reset this alarm that mutes
⚫
the alarm sound, but the visual alarm is still active.
Freeze/Keyboard Lock Key: Press this key to freeze or unfreeze waveforms. The Display
⚫
View key and view setting key are disabled when waveforms are frozen. Long press this key can
lock or unlock the keyboard. When locking icon displays on the screen, a red lock icon displays on
the left of the "Menu" button. At this time, other Shortcut Keys are disabled.
NIBP Key: press this key to start NIBP measurement, and during measurement, pressing
⚫
this key pauses NIBP measurement.
Display View Key: press this key to shift the main screen when there is no pop-up window
⚫
on the screen. When a pop-up window is on screen, this key acts as "Exit" (that is the "Cancel"
button on the window.
22
Publicité
