Publicité
Les langues disponibles
Les langues disponibles
18.1 Using a Printer
The thermal Printer can be used to print patient information, measurement numerics, up to three
waveforms.
Note
The built-in printer may be used due to the configuration.
Printer operation instruction
Power indicator: The green light shows the power is on. While the monitor is out of power, the
⚫
green light is off.
Error indicator: red light is constant, which shows the printer is out of paper, or the printing paper
⚫
is not installed correctly. When the printing paper is loaded correctly, the red light is off.
Power Indicator
Error Indicator
18.2 Loading Printing Paper
This description is for loading paper for the built-in printer.
Operating procedures:
1. Press both "OPEN" notches with force on printer shield with two thumbs to open it.
2. Move the tab of rubber roller lock at the left 90°upwards to unlock it.
3. Cut one end of the paper into triangle, and load the paper from the underside of the rubber roller.
4. Turn the roller clockwise to get the paper rolled, and put the paper roll into the compartment.
5. Pull the paper out of paper slot on the shield.
6. Move the tab of the rubber roller lock 90° downwards to lock it.
7. Put the shield back in position and secure it.
Chapter 18 Printing
123
Open button
Paper cartridge
Publicité
