Publicité
Les langues disponibles
Les langues disponibles
user or patient hazard. Performance is not guaranteed if an item labeled as single patient
use is reused.
Inspect the sidestream on-airway adapters and sidestream sampling kits for damage
before use. DO NOT use the sidestream on-airway adapters and sidestream sampling kits
if they appear to be damaged or broken.
If the CO
waveform (Capnogram) appears abnormal, inspect the CO
2
and replace it if needed.
Periodically check the CO
buildup. Do not use the sensor or tubing if there is excessive moisture or exterior
condensation.
Electric Shock Hazard: The CO
Refer service to qualified service personnel. Do not open the sensor cabinet at will, as
electric shock hazard may occur.
Place the exhaust vent of the CO
the exhaust vent.
Always disconnect the CO
been damaged. Refer servicing to qualified service personnel.
Do not sterilize or immerse the CO
Replace the sidestream on-airway adapters and sidestream sampling kits if excessive
secretions are observed.
Do not operate the CO
Monitor the CO
check the patient and the sampling line. Replace the line if needed.
Do not use the device on patients that cannot tolerate the withdrawal of 50 ml/min +/- 10
ml/min from the airway or patients that cannot tolerate the added dead space to the
airway.
Do not apply excessive tension to any sensor cable or pneumatic tubing.
Explosion Hazard: Do not use in the presence of flammable anesthetics or other
flammable gasses. The use of the CO
explosion hazard.
Electrical Shock Hazard: Always disconnect the CO
it if it appears to have been damaged. Refer servicing to qualified service personnel.
Caution
The power voltage over monitor working voltage may cause damage to the CO
Likewise, too low power voltage may affect the CO
CO
sensor not work.
2
/Flow sensor and tubing for excessive moisture or secretion
2
Sensor contains no user-serviceable parts.
2
Sensor in drafty ambient and do not let anything block
2
Sensor before cleaning. Do NOT use it if it appears to have
2
2
Sensor when it is wet or has exterior condensation.
2
waveform (Capnogram). If you see changes or abnormal appearance,
2
Sensor in liquids.
Sensor in an environment may present an
2
Sensor before cleaning. Do NOT use
2
measuring accuracy or even make the
2
88
airway adapters
2
sensor.
2
Publicité
