Publicité
Les langues disponibles
Les langues disponibles
Parameter 3 to Parameter 5 can be set as OFF, TEMP, NIBP, RESP (or CO
⚫
All waves: Select this item and all waveforms (including all ECG waveforms and other waveforms)
⚫
display on the ECG trace view. The factory default is un-select.
5.2.4 NIBP List view
Description
In this View, 4 waveform channels default to ECG I, ECG II, ECG III, and SpO
panels in the parameter area default to ECG, SpO
view displays.
NIBP List View Settings
Waveform 1 can be set as OFF or one ECG wave.
⚫
Waveform 2 and 3 can be set as OFF, SpO
⚫
Waveform 2 and RESP (or CO
Waveform 4 is nonadjustable; the default is NIBP List.
⚫
Parameters 1 and 2 are non-adjustable; the default is ECG and SpO
⚫
Parameter 3 ~ 5 can be set as OFF, NIBP, RESP, TEMP, CO
⚫
5.2.5 OxyCRG view
Description
In this View, the upper 3 waveform channels default to ECG II, SpO
waveform area is Oxycardiorespirogram, which consists of an HR trend graph, SpO
Respiration waveform or RR trend graph within a particular time scale. In the "OxyCRG View Settings"
window, the time scale and the 3rd graph can be changed as needed (refers to the following section).
Settings of the parameter area are similar to that in "General View".
OxyCRG Settings
Waveform 1 can be set as OFF or one ECG wave.
⚫
Waveform 2 and 3 can be set as OFF, SpO
⚫
The time scale for OxyCRG can be set as 1min, 2min, or 4 min. Min is the time unit of "Minute".
⚫
The 3rd graph in OxyCRG can be set as "RR Trend" or "Resp Wave".
⚫
Parameters 1 and 2 are nonadjustable; the default is ECG and SpO
⚫
Parameter 3 - 5, or Parameter 7, can be set as OFF, TEMP, NIBP, RESP, and CO
⚫
5.2.6 Short Trends View
Description
In this view, several waveform channels can be displayed on the waveform area. Trend graphs are in the
middle of the screen.
The abscissa of trend graph (-2h -0) means the various trends of every parameter value from now to the
previous 2 hours. The panels of HR, SpO
, NIBP, RESP, and TEMP. At the same view, the NIBP list
2
, RESP (or CO
2
) for Waveform 3.
2
and RESP (or CO
2,
, TEMP, RESP, and NIBP display on the parameter area.
2
39
).
2
plethysmogram. Parameter
2
). The default is ECG II for Wave 1, SpO
2
respectively.
2,
and CSM.
2
, and RESP. The lower area of the
2
trend graph, and
2
).
2
respectively.
2,
.
2
for
2
Publicité
