Publicité
Les langues disponibles
Les langues disponibles
13.6 Understanding the CO
CO
panel
2
Label of CO
and EtCO
2
Value of EtCO
Value of Inspired CO
2
: the label and unit of EtCO
⚫
: the label of FiCO
⚫
mmHg: the unit of EtCO
⚫
rpm: the unit of Respiration rate
⚫
"39.9
3.3
⚫
13.7 Changing CO
When CO
Monitoring is selected, the respiration parameter is by the CO
2
waveform area shifts to the CO
area.
Select "Menu" → "CO
In the RESP settings window, CO
selected, then all items setting as "RESP" shift to "CO
On RESP Settings screen, there is CO
or off CO
Monitoring. Turn on the switch when there is a need to monitor the CO
2
mode reduces the power consumption and also extends the life of the CO
In order to maintain the monitor, please set the CO
function is not used.
Gain: the CO
⚫
pediatric patients, and X2 for neonate patient.
X1/2: half-scale size of the base gain
X1: waveform scale with base gain
X2: twice scale size of the base gain
X4: four times scale size of the base gain
Speed: Respiration waveform sweep speed of, 2 options 6.25mm/s and 12.5 mm/s. The default is
⚫
12.5 mm/s.
Apnea: The timeout setting for Apnea alarm (in second).
⚫
(1) When CO
Display
2
Unit of EtCO
2
2
2
and FiCO
2
2
14": the value of EtCO
Settings
2
waveform area, respiration parameter area shifts to the CO
2
" to enter into CO
related setting.
2
2
Settings can be entered if your monitor is configured with CO
2
: Click it to turn on or off CO
Monitoring Switch
2
waveform gain. 4 options: X1/2, X1, X2, and X4. The default is X1 for adult and
2
monitoring is on:
2
Label of Fi CO
2
2
2
FiCO
and respiration rate
2,
2
Monitoring. When the CO
2
". See Chapter Monitoring Carbon Dioxide (CO
2
switch at OFF state in system setup when the CO
2
93
Label of Respiration rate
Value of Respiration rate
module. The respiration
2
parameter
2
2
monitoring is
2
: click it to turn on
parameter. Selecting this
2
measurement module.
2
monitoring.
).
2
2
Publicité
