Gima K10 Manuel D'utilisation page 68

be selected between Lead I, Lead II and Lead III.
In order to obtain other Leads of the ECG signals, such as aVL, aVR, aVF and V, the ECG cable with
⚫
5 lead wires should be used and the "Wires" should be set to "5-leadwire". At this situation, 7
Leads of ECG signal (lead I, II, III, aVL, aVR, aVF, V) can be obtained and displayed simultaneously.
Note

If any side-effect such as allergic or itchy reaction is noted, remove the electrodes from the
patient immediately.

The symbol indicates that the cable and accessories are "CF" type levels for
protection against electric shocks and with defibrillation-proof capability.
7.3.2 ECG Electrodes Placement
Electrode Placement
56