Publicité
Les langues disponibles
Les langues disponibles
➢ Parameter Settings
Parameter 1 and 2 is fixed to be ECG and SpO
settings are OFF, TEMP, NIBP, and RESP.
Note
Waveform 1- 5 and Parameter 1 - 5 are corresponding to the waveform 1- 5 and Parameter
1- 5. Similarly, in other views, the waveform 1- 5 and Parameter 1- 5 corresponds to that in
the View settings window.
5.2.2 Big Font View
Description
In this view, the default 3 waveform channels in the waveform area are ECG waveform, SpO
and RESP waveform. Moreover, the default 4 parameter panels in the parameter area are the ECG Panel,
SpO
Panel, NIBP Panel, and RR panel.
2
Big Font View Settings
➢ Waveform Settings
Wave 1 can be set as any ECG lead, or turn off this channel directly.
⚫
Wave 2 and Wave 3 can be set as OFF, another ECG wave different from that selected in Wave I,
⚫
SpO
, and RESP (or CO
2
and RESP (or CO
➢ Parameter Settings
"Param 1", "Param 2," and "Param 4" can be set as OFF, ECG, SpO
⚫
"Param 3" can be set as ECG, TEMP, NIBP, SpO
⚫
Cascaded above: select it means all first 3 channels waveform display the waveform set in
⚫
Waveform 1, and waveform 2 and waveform 3 are the cascaded waveform of Waveform 1.
Moreover, at the moment, Wave 2 and Wave 3 are nonadjustable. The default is deselected.
Close all waveforms: Select it means waveform 1 to waveform 3 does not display on the waveform
⚫
panel in the big font view, but the information in the parameter panel displays.
5.2.3 All ECG Trace view
Description
In this View, all ECG trace waveforms display on-screen simultaneously. All 7 traces of ECG waveform display
on the left and the 5 parameter panels are on the right.
All ECG Trace View Settings
The default 12 waveforms displaying in the view are: ECG I, ECG II, ECG III, ECG aVR, ECG aVL, ECG aVF, ECG
V1, ECG V2, ECG V3, ECG V4, ECG V5, ECG V6, waveform 1~12 are nonadjustable.
The default 7 waveforms displaying in the view are ECG I, ECG II, ECG III, ECG aVR, ECG aVL, ECG aVF, and
ECG V, waveform 1~7 are nonadjustable.
Parameter 1 and Parameter 2 are nonadjustable; the default settings are ECG and SpO
⚫
respectively.
respectively, which cannot be adjusted. Parameter 3 to 7
2,
). If "3-lead wires" is selected, then Wave 2 and Wave 3 can be set as SpO
2
), or set as the current cascaded ECG waveform (e.g., ECGII).
2
2,
and RESP (or CO
)
2,
2
38
plethysmogram,
2
NIBP, TEMP, and RESP (or CO
2,
,
2
).
2
Publicité
