Main Menu: Bed Controls - Stryker InTouch FL27 Manuel D'utilisation

MAIN MENU: BED CONTROLS

A
J
A
Button Name
Bed Height Up/Down
A
Fowler Up/Down
B
Gatch Up/Down
C
Foot Up/Down
D
Trendelenburg
E
Reverse Trendelenburg
F
Angle Indicator
G
H HOB Angle Indicator
I Battery Power Indicator
J
Bed Height Indicator
Note
• When pressed the buttons turn grey .
• The bed height is actually the distance between the floor and the bed support mattress .
Return To Table of Contents
1-32
Footboard Operation Guide
B C
B C
Figure 7.0
Function
Press the Up arrow to raise the height of the bed or on the
Down arrow to lower it .
Press the Up arrow to raise the Fowler section to the desired
angle and on the Down arrow to lower it to the desired angle .
Press the Up arrow to raise the Gatch section to the desired
angle and on the Down arrow to lower it to the desired angle .
Press the Up arrow to raise the Foot section to the desired
angle and on the Down arrow to lower it to the desired angle .
Press this button to place the bed in the Trendelenburg position
(Head Down / Foot Up) .
Press this button to place the bed in the Reverse Trendelenburg
position (Head Up / Foot Down) .
This indicator shows the angle of Trendelenburg or Reverse
Trendelenburg .
This indicator shows the angle of HOB .
This indicator shows the power left in the battery .
This indicator shows the actual height of the bed .
2151-009-005 REV B
D E
D
G
H
F
I
www.stryker.com