Stryker InTouch FL27 Manuel D'utilisation page 67

Line Management System (Accessory Clip) - FA64210-XXX
The Optional Line Management System (Accessory Clip) was designed to help manage the tubes around the bed .
INSTALLATION
Required Tools: None
1 . Open clip (A) and install at a strategic and secure location on the bed .
2 . Raise clip prong (B) and insert tubes of ¾" diameter or less .
3 . Close opening and make sure that the tubes are not pinched .
WARNING
• Make sure the clip is not located where it can interfere with a mechanism or activate one .
• If accessory is placed in a liquid solution it could deteriorate the mechanism .
CAUTION
• Do not use with tubing of a diameter greater than 0 . 7 5" (19 mm) .
• Sterilize accessory after each use (see procedure in Maintenance Manual)
• Make sure that the clip is stable when installing .
A
www.stryker.com 2151-009-005 REV B
B
Return To Table of Contents
1-65