Publicité
Les langues disponibles
Les langues disponibles
6.5.2 TRANSFER INTO SEPARATE CONTAINER
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
31 - ENGLISH
If you wish to transfer the product from the heater
vessel to an external container, do as follows:
-
Ensure the amount of product to be transferred is
compatible with the useful capacity of the
container of destination.
-
Make sure the heater tap is in the diagonal
position to allow the product to flow directly into
the container you wish to use.
If not, extract the blocking pin from its seat, turn
the tap body to the diagonal position and
reposition the pin (Fig.1-2)
-
Regardless of the function in progress, press the
STIRRING key on the control panel of the heater
(Fig.3).
To quickly and completely remove the product
from inside the vessel, it is always necessary that
the beater be functioning.
-
To begin the transfer, turn the knob of the piston
to the released position and pull it slowly towards
you (Fig.4).
Pay the utmost attention during transfer of boiling
mixtures; handle the tap piston with extreme care,
use suitable containers and take all possible
precautions to reduce the risk of injuries, even
serious, due to contact with boiling product.
-
When all the product has been transferred in the
container and the heater vessel is empty, push
the piston to the closed position and turn it to
block it.
-
Press "STOP" on the heater control panel (Fig.5).
Publicité
