Frigomat TWIN 4 S.03 Manuel D'instruction Et De Maintenance page 121

8. TROUBLESHOOTING INSTRUCTIONS
8.1 MANAGEMENT OF HEATER ALARMS
MESSAGE
EME
TER
DIS
L F
TEv Int
TEv cor
TEf Int
TEf cor
DESCRIPTION
Absent or lifted.
The buzzer emits an intermittent acoustic
signal.
A motor circuit breaker or the transformer
fuse has intervened.
The buzzer emits an intermittent acoustic
signal.
Communication between the board and
the display interrupted.
The level of the glycol is insufficient.
The buzzer emits an intermittent acoustic
signal.
The tank probe is interrupted.
The buzzer emits an intermittent acoustic
signal.
The tank probe is in short-circuit.
The buzzer emits an intermittent acoustic
signal.
The fluid probe is interrupted.
The buzzer emits an intermittent acoustic
signal.
The fluid probe is in short-circuit.
The buzzer emits an intermittent acoustic
signal.
REMEDIES
Make sure that the lid is
assembled and lowered
properly.
Wait a few minutes and then
press STOP to restore machine
operation.
If the alarm continues, contact
the technician.
Contact the technician.
Contact the technician to check
the level of the glycol in the
tank and to see if the circuit
leaks.
Contact the technician to check
and replace the faulty probe.
Contact the technician to check
and replace the faulty probe.
Contact the technician to check
and replace the faulty probe.
Contact the technician to check
and replace the faulty probe.
ENGLISH - 58