Frigomat TWIN 4 S.03 Manuel D'instruction Et De Maintenance page 86

6.4.2 SEMI-AUTOMATIC CYCLE
Fig.1
Fig.2
Fig.3
Fig.4
23 - ENGLISH
- Press the SEMI-AUTOMATIC key to select
the semi-automatic thermal treatment cycle
with temperature and stand-by time control
(Fig. 1).
- The LEDs of the UP (▲),Confirm (◄►) and
DOWN (▼) keys start flashing and
numbers relative to the set of temperature to
be configured, between 30 and 105°C,
appear on the display: press the "UP (▲)"
and "DOWN (▼)" keys to increase or
decrease this value (Fig. 2). Once the wanted
value is reached, press the CONFIRM (◄►)
key to memorise the made programming (Fig.
3).
The maximum programmable temperature
value is equal to 105°C but not all mixtures
and not all quantities can reach such a high
temperature value.
- After programming of the temperature set to
be reached, select the time during which this
temperature is kept constant.
The LEDs of the UP (▲), Confirm (◄►) and
DOWN (▼) keys start flashing and
numbers relative to the set of time to be
configured, between 0' and 10' hours, appear
on the display: press the "UP (▲)" and
"DOWN (▼)" keys to increase or decrease
this value (Fig. 4). Once the wanted value is
reached, press the CONFIRM (◄►) key to
memorise the made programming and start
the processing cycle (Fig. 3).
-
the
the