Publicité
Les langues disponibles
Les langues disponibles
HEATER BEATER ASSEMBLY
BATCH FREEZER BEATER ASSEMBLY
Attach the mobile scrapers to the
steel structure of the beater.
Make sure they are orientated
correctly, perfectly mobile and that
the thrust springs are positioned
correctly in their seats.
Insert the complete beater into the
tank and carefully check that every
part is correctly positioned as
illustrated in the figure.
Insert the metallic springs in the
seats of the scrapers.
Insert the scrapers in the containing
pockets being careful to verify the
assembly is carried out as in figure.
Manually verify that the scraper is
correctly inserted inside the beater
and free to slide in the seat. Verified
at the spring pushes the scraper
with force towards the outside.
Insert the seal gasket placed on the
drive shaft of the beater push it up
to the stop.
ENGLISH - 14
Publicité
