Publicité
Les langues disponibles
Les langues disponibles
6.4.1 AUTOMATIC CYCLE 85°C
Fig.1
Fig.2
Fig.3
Fig.4
- Press the 85° AUTOMATIC key to start the
automatic heating cycle at 85°C. The key LED such
as on and the instantaneous temperature of the
product in tank during the entire processing cycle is
shown on display (fig.1-2).
- When a few minutes have elapsed and the
temperature of 85°C is reached, the display flashes
and the buzzer sounds intermittently, to inform the
operator that the boiling mixture can be removed. If
this is not possible right away, the beater will keep
on mixing and the electrical heat element will hold
the mixture at the correct temperature, thus starting
the PRESERVATION phase without limits of time.
- During the preservation phase, the temperature of
the product in tank flashes on the display.
- It is possible to go to the product extraction phase
at any time.
If the mixture contains ingredients which could alter
own organoleptic features with tank temperatures
too high (120°), select the SLOW FLAME function
to reduce the fluid temperature of the bain-marie
system to 98°C (Fig.3).
In this case, heating times could lengthen: this is
normal and does not constitute an anomaly.
At any moment, it is possible to verify the
instantaneous temperature value of the bain-marie
fluid by keeping the 85° AUTOMATIC key pressed
for a least 3" (Fig.4). This value will be displayed for
about 10".
ENGLISH - 22
Publicité
