Frigomat TWIN 4 S.03 Manuel D'instruction Et De Maintenance page 113

SANITIZING REMOVABLE PARTS
PREPARATION OF WASHING TUB
• Wash your hands well and/or wear disposable
gloves.
• Fill a clean tub with a sufficient amount of drinking
water at approximately 50°C and the sanitizer.
• Prepare the supplied brush and the OR disassembly
We suggest using the following sanitising
solution:
Ecolab P3 Topax-san
(4% dilution = 200 ml every 5 litres of water).
device and immerse them in the solution.
REMOVING AND CLEANING THE DOOR
• Lift the blocking lever and open the door by rotating it
to the left.
• Pull the hinge pin upwards and remove the door,
holding it with both hands.
Handle the door with great care: because of its great
weight, should it fall, it could cause injuries to staff and
damages to things.
• Rest the door on a clean work surface and
disassemble its parts:
- Unscrew the handle adjustment knob
- Disassemble the guide and the spring
- Remove the extraction door
- Remove the O-rings
• Immerse the previously disassembled components
into the tub with the sanitising solution and brush the
surfaces with care. Pay special attention to the safety
grid and gaskets.
ENGLISH - 50