Frigomat TWIN 4 S.03 Manuel D'instruction Et De Maintenance page 84

6.4 THERMAL PROCESSING OF MIXTURES
After having installed the machine in compliance with the instructions of chapter 3 and
having accurately washed and sanitised it, according to the instructions contained in
chapter 7, proceed as follows to start thermal processing:
21 - ENGLISH
- Make sure the master switch is closed and that
the machine is powered correctly.
- Make sure the dispenser tap is closed and that the
tank beater is assembled correctly.
- Lift the cover and pour the ingredients in the tank,
strictly observing the minimum and maximum
amounts admitted per cycle and carried on the
following table:
MODEL
TWIN 4
Failure to comply with the minimum and maximum
load values can entail machine malfunctioning and
even breakage.
- Lower the lid and select the wanted work cycle,
referring to the instructions in the successive
paragraphs.
MIN MAX
(LITRES) (LITRES)
1 4