Publicité
Les langues disponibles
Les langues disponibles
7.1.2 BATCH FREEZER WASHING
49 - ENGLISH
PREWASHING
• Pour
the
maximum
(approximately
machine.
• Press the MIXING button to start the beater motor.
Let it run for about 3 min: Open the dispenser disk to
drain all the wash water. Repeat the procedure until
the water coming out is clear and clean.
• Pour
the
maximum
cleansing/sanitising solution into the machine.
• Press the MIXING button in order to start the beater
motor and let it run for about 15'. Open the dispenser
disk to drain all the sanitising solution.
We suggest using the following sanitising
solution:
Ecolab P3 Topax-san
(4% dilution = 200 ml).
• Pour the maximum admitted load of cold drinking
water into the machine to rinse the surfaces which
were just treated with the sanitiser.
• Drain the rinse water and turn the machine off.
• When pre-washing is over, all the removable parts in
contact with the product must be disassembled and
sanitized in a separate tub.
admitted
load
50°C)
drinking
water
load
of
warm
into
the
admitted
of
Publicité
