17 - System Setting
EN
With the oven on, select the icon
[FUNCTION] knob to enter the SETTINGS menu. This menu
permits setting a number of parameters or special functions.
It also permits accessing the error events list.
1. Press the [FUNCTION] knob to select the sub menu and
confirm by means of pressing the [FUNCTION] knob.
2. Use this menu to change the following settings:
Press the [FUNCTION] knob to select the item to be set or
to be displayed from among the three available ones and
confirm by means of pressing the [FUNCTION] knob.
Event Log
The menu permits checking any recorded errors. These
codes can be notified to the after-sales service.
36
Demo
and confirm with the
The purpose of this function is to set the DEMO mode,
which makes the oven useless forcookingbutautomatically
performs a demonstration of functions.
1. Press the [FUNCTION] knob to select the item ON.
2. Confirm by means of pressing the [FUNCTION] knob.
3. Press the [ON/OFF] knob.
After about 30 seconds, the oven starts to operate in this
mode.
To temporarily stop the DEMO function, simply keep any
knob pressed for a few second suntil the oven switches to
standby.
To start it again, press the [ON/OFF] knob.
To disable the function, enter the DEMO display page and
set OFF. Confirm by means of pressing the [FUNCTION]
knob.
NOTE Once set, the function remains enabled even if the
oven is disconnected from the power mains.