General Oven Information; Power Failure; Default Settings - Fulgor Milano SOFIA FSRC 4807 2P MK 2F Serie Manuel D'instructions

Before using your oven for the first time remove all packing and foreign materials from the oven(s). Any material of this sort
left inside may melt or burn when the appliance is used.
Error codes
This code appears in the event of the electronic control
indicating a fault. When the error appears, the current
function is blocked. If the type of error is related to a safety
function, the oven becomes unusable and every time a start
attempt is made, the same error appears (in which case
call in the after-sales service), while if the error relates to
a minor fault, after being restarted the oven can be used
for the functions that do not involve the faulty part (e.g., a
heating element).
Beeps
Confirm that the command has been received after a knob
has been pressed.
It also indicates that a time function has been completed
(e.g. Timer or Timed Cooking). During the execution of a
recipe, an acoustic signal warns the user that the oven is
waiting for operation by the user (e.g., insert the dish or
turn it over).
Beeps also signal an oven fault.
Door Lock
It's displayed steadily when the door is locked. The symbol
flashes when the latch is moving in order to lock or unlock the
door. Do not attempt to open the door at this time. Door can
be opened when the symbol no longer appears. A padlock
appears when the door has been locked automatically due
to self-clean mode.

Power Failure

After the power returns to the oven, the door lock mechanism
perform a test run then the clock time and date are displayed.

Default Settings

The cooking modes automatically select a suitable
temperature when the cooking mode is selected, these can
be changed when a different one is needed.
F Failure Number Codes
These codes are displayed when the electronic control
detects a problem in the oven or in the electronics.
The error code is recorded in the Error Log in the Setup
menu. This error can be communicated to the service
technician so he/she can understand the possible cause of
the problem in advance.

12 - General Oven Information

Preheat and Fast Preheat
Whenever a cooking made is set and the oven is heating,
the preheating starts, during this period, the instantaneous
temperature is displayed together with the thermometer
icon.
As soon as the 100% is reached, the control sounds an
"end of preheat" tone and the current temperature value
disappears.
When it's necessary to heat up the oven rapidly, a Fast
Preheat mode is available: it use the heating elements and
the convenction fan in a special way, in order to reduce the
heating time as long as possible. After having set one one of
the cooking functions for which the fast preheat is available
and set the desired temperature value, than turn the knob
to the RIGHT, after entering the functions menu, select the
icon by means of the knob
of the pressing [FUNTIONS] knob. As soon as the set-point
temperature is reached, the control sounds a and both "Fast
Preheat Icon" and "current temperature" disappear. The
oven switches automatically to the desired cooking mode
that was previously set: put the food inside now.
Timer
WARNING
The timer on your oven does not turn the appliance on
or off, its only purpose is to alert you through the buzzer.
When you want to turn off the oven automatically, use the
end-of-cooking or delayed cooking function.
NOTE: Pressing the OFF knob does not reset or stop the
timer.
1. Select the function
the function knob and confirm by means of the pressing
functionknob.
2. The time can be set from 1 minute to 12 hours and 59
minutes and, when set, the remaining time is always
visible in the bottom status bar until the time expires or is
reset.
3. To canel the time set, you must reset the timer by pressing
the [FUNTION] Knob fot 2 seconds when you are in
timer setting menù.
4. Timer format is usually HR:MIN, switching into MIN:SEC
during the last minute.
5. When the time expires, the display shows 00:00
and the buzzer will sound for one minute or until the
[FUNCTION] knob is pressed.
and confirm by means
and set the desired time using
EN
29