Fulgor Milano SOFIA FSRC 4807 2P MK 2F Serie Manuel D'instructions page 116

20 - Setting the Meat Probe (if present)
EN
WARNING
• To avoid burns, use a kitchen glove to fit and remove the
meat probe when the oven is hot.
• Always remove the probe using the grip. If it is removed
by pulling the cable, it could suffer damage.
• Make sure the food is completely de-frozen when the
probe is fitted. Otherwise it could suffer damage.
NOTE The meat probe is not enabled for all functions (meat
probe function not available also for Recipes). If
it is fitted during one of these functions, a probe
removal message appears on the screen.
If the meat probe is accidentally removed during
operation, a warning message appears on the
screen.
The temperature of the probe can be set between
104°F and 212°F (40°C - 100°C).
The oven stores the last temperature set by the user.
Insert the tip of the probe in the central and thickest part of
the meat.
Make sure the probe is not in contact with the fat, bone,
oven parts or dishes.
The meat probe is automatically recognised when it is
inserted and the icon
When a cooking mode is started with the probe inserted, the
display page for setting the function appears automatically.
42
appears on the screen.
1. Set the required probe temperature by means of the
[TEMPERATURE] knob.
2. After pressing the [FUNCTION] knob the cooking starts
and all probe cooking details appear on the screen.
• Cooking mode
• Oven temperature
• Set probe temperature
• Instantaneous probe temperature
Once the set probe temperature is reached, the oven
switches off and an acoustic signal warns that cooking has
terminated.
NOTE: After cooking has started, the oven temperature can
in any case be changed at any time by means ofthe
[TEMPERATURE] knob.
To change the probe temperature, turn the [FUNCTION]
knob [BACK] for 2 seconds, then select again the cooking
function and change the temperature value.