Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6 - Installation Instruction
EN
STEP 9
After completing the electrical and gas connections (see
included instructions) measure the four corners in cutout
area to verify if flooring is level. Adjust the leveling legs to
the desired height and ensure range is level. Turn the bottom
section of each leg counter-clockwise to raise the leg and
clockwise to lower it.
IMPORTANT
When the unit first powers on, it must complete a safety
door lock test. Ensure doors are reinstalled if they were
removed to ease movement of the range prior to sending
power to the appliance. Do not open the oven door or
attempt to use the oven until you are sure the test has been
completed successfully. Opening / closing the door during
the test could result in damage to the lock mechanism.
Refer to the instruction manuals for more details if needed.
Ensure floor is protected. Slide unit into place making sure
to engage the anti-tip bracket.
16
STEP 10
Hook tabs on bottom of toekick into slots on either side of the
frame and rotate up until the magnets at the top of toekick
make contact and hold it in place securely.
Publicité
Table des Matières
