7 - Setting the Clock and Timer
EN
Mechanical Minute Timer
The minute minder can be set to a maximum time of 60 minutes;
it emits an alarm tone when the set time period has elapsed.
The minute timer operates independently of the oven.
On models equipped with a mechanical timer rather than an
electronic timer, the timer knob must first be turned clockwise
to the 60 minute position and then turned counter-clockwise to
the desired time setting. When the set time has elapsed, the
alarm will sound.
The alarm tone will stop automatically after a certain period.
Timer Touch Control
Setting the clock
"Auto" and "0:00" will start flashing when the unit is switched
on for the first time. To set the clock, press the central button for
about 3 seconds. When
the correct time.
Note: only 24 hrs setting available.
Wait until a beep tells you that the clock has been set.
To set the time at a later stage, press
seconds and then adjust the clock as described above.
Minute counter
As this minute counter does not control the oven, when it
finishes counting the oven will continue to work.
To set, press the central button for 3 seconds until
+
-
Press
and
to set the required time.
To set the minute counter at a later stage, press the central
button for 3 seconds and adjust as described above.
The minute counter beeps when it finishes counting.
To disable it, press any button.
12
+
appears, press
or
-
to set
+
and
-
together for 3
appears.
Adjusting beep volume
To adjust beep volume, press
Then press the central button and wait for "ton1 " (high volume)
to flash. Press
-
to select 'ton2" (medium volume) or "ton3"
(low volume).
Press the central button to set the selected volume.
+
and
-
together.