Fulgor Milano SOFIA FSRC 4807 2P MK 2F Serie Manuel D'instructions page 89

STEP 7
In case it is necessary to move the range; using the foam
and/or cardboard packaging (13), replace them around
the range strategically to protect the finished surfaces of
the range from contact with the hand-truck and any straps
around the unit (14). In the case of smaller ranges, you may
use this technique to remove the range from the skid and
installing the legs (15). Tilt the range to lower the hand-truck
wheels off the skid. Place appliance runners on the floor at
the left and right sides in front of the opening when moving
into final position to protect flooring. The oven door(s)
add(s) a great deal to the overall weight of the range, you
may find it helpful to remove the doors if moving the range
a significant distance. Refer to the included instruction
manuals for how to remove and reinstall the doors.
13
14
STEP 8
Install the back guard (if provided) by the three screws on the
back. In some cases this may be an accessory back guard
that was ordered separately rather than the one which was
included with the range. Refer to instructions included with
any accessory for specific installation requirements.
15
6 - Installation Instruction
9"
EN
3"
15