Setting The Clock And Timer; To Set The Time Of Day; To Set The Timer - Fulgor Milano Sofia 30 DUAL FUEL Guide D'utilisation Et D'entretien

The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the clock displays the
time 12:00 . The clock time will appear during all oven operations except when there is the timer or any timed cooking operations
AM
running. The oven is preset to a 12-hour clock and indicates

To Set the Time of Day

1. Touch until the display shows the "SET TIME" writing.
TIME
+
2. Touch or - to set the desired time, the hours will begin
flashing: continue until the correct hour value and
indication is selected.
3. Touch again to confirm the hour and minutes will start
TIME
flashing.
+
4. Touch or - to set the desired minutes value or hold the
key to change by 10 minute increments.
5. Touch TIME again or wait for 5 seconds in order to confirm
the time.
NOTE: The Time of Day can never be set if any time function is
already set: first delete all the active time functions.

8 - Setting the Clock and Timer

and .
AM PM

To Set the Timer

1. Touch
TIME
+
2. Touch or
or begin flashing: continue until the desired value is set.
AM PM
3. Touch
TIME
start flashing.
+
4. Touch or
key to change by 10 minute increments.
5. Touch
TIME
the time.
6. "TIMER" will be continuously displayed.
7. When the time ends, reminder beeps will sound for 15
minutes or until the
8. Timer format is usually HR:MIN, switching into MIN:SEC
during the last minute.
9. The displayed value is always rounded to the lower minute.
For example: 2:43 is displayed as the timer counts from
2:43:59 to 2:43:00.
until the display shows the "TIMER" text.
- to set the desired timer value, the hours will
again to confirm the hour, now the minutes will
- to set the desired minutes value or hold the
again or wait for 5 seconds in order to confirm
TIME key is pressed.
EN
13