Fulgor Milano SOFIA FSRC 4807 2P MK 2F Serie Manuel D'instructions page 107

Instruction for initial switch-on
Once the range has been connected to the power supply for
the first time, the control atomatically prepares for setting a
number of user settings, which remain stored in case of any
subsequent switch-on.
NOTE: Both at the first and subsequest connections to
the power supply, the door lock mechanism performs a
calibration run - in this phase, always keep the door
closed.
• Language
• Temperature&Weight
• Time
• Data
Refer to the USER SETTING paragraph for setting
instructions.
After making the user settings, the control moves automatically
to the "Standby" display page.
Oven Cavity Selection (Double Oven)
Once the appliance is switched ON two icons are showed
on the top left corner in order to inform the user which cavity
is selected and its condition.
• The RED color identifies the oven cavity ON (ACTIVE
FUNCTION).
• The WHITE color identifies the oven cavity ON (NOT
ACTIVE FUNCTION).
• The GRAY color identifies the oven cavity OFF.
• The frame identifies the Oven selection (SHOWN ON
THE DISPLAY).
EXAMPLE 1
LARGE oven: RED icon - ON (active / selected)
SMALL oven: GRAY icon - OFF (not selected)
15 - Instruction for Use
EXAMPLE 2
LARGE oven: RED icon - ON (active / selected)
SMALL oven: RED icon - ON (active / not selected)
EXAMPLE 3
LARGE oven: RED icon - ON (active / not selected)
SMALL oven: WHITE icon - ON (not active /
selected)
EXAMPLE 4
LARGE oven: GRAY icon - OFF (not selected)
SMALL oven: WHITE icon - ON (not active /
selected)
NOTE: Press the [ON/OFF] knob to switch the oven ON
and press again to switch it OFF. The oven returns
to standby mode.
To select the Oven Cavity press the related
[FUNCTION] knob for 2 seconds.
If an oven cavity is OFF and selected while
the other is ON, an
thedisplaytoadvisethatthe cavity not selected is
activated.
icon is showed on
EN
33