Electrical Requirements; General Information; Electrical Connection - Fulgor Milano SOFIA Instructions D'installation

7 - Electrical Requirements

EN

General Information

This appliance must be supplied with the proper voltage and
frequency and connected to an individual, properly grounded
branch circuit, protected by a circuit breaker or fuse having
amperage as noted on the rating plate. We recommend you
have the electrical wiring and hookup of your appliance
connected by a qualified electrician.
After installation, have the electrician show you where your
main appliance disconnect is located. Check with your local
utilities for electrical codes which apply in your area. Failure to
wire your cooktop according to governing codes could result
in a hazardous condition.
If there are no codes, your appliance must be wired and fused
to meet the requirements of the National Electrical Code,
ANSI/NFPA No. 70 - Latest edition. You can get a copy by
writing:
National Fire Protection Association
Battery march Park
Quincy. MA 02269
In Canada your appliance must be wired and fused to meet
the requirements of the Canadian Electrical Code.
Be sure the installation of this product in a mobile home
conforms with the Manufactured Home Construction and
Safety Standard, Title 24 CFR, Part 3280.
If this standard does not apply, you must follow the standard
for Manufactured Home Installations, ANSI
Manufactured Home Installations, Sites and Communities and
ANSI/NFPA 501A or with local codes.
You can get a copy of the Federal Standard by Writing:
Office of Mobile Home Standards
HUD Building
451 7th Street, S.W.
Washington, D.C. 24010
LOCATION OF RATING PLATE
20
All manuals and user guides at all-guides.com

Electrical Connection

An adequate electrical supply and outlet must be used to
operate the electrical parts of your appliance.
Electrical Grounding Instruction
Plug into a grounded 3 prong
outlet. Do not remove ground
prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
A225.1 and The power cord of this appliance is equipped with a 3-prong
(grounding) plug which must be used with a properly
grounded 3-hole outlet with a standard 120 Volt, 60 cycle
AC household current. If you do not have a 3-hole grounded
outlet, have a qualified electrician change your old one. A
grounding adaptor will be needed to convert the old one until
the outlet can be replaced. This method is only temporary,
and a qualified electrician should test it to be sure it meets
requirements.
WARNING
IMPORTANT