Tractel Travspring Manuel D'installation, D'emploi Et D'entretien page 50

N – Post plate for angle anchor
Angle post plates enable secure mounting of the
bend at angles of 75° to 105° thanks to the presence
GB
of oblong holes either in the plate for the travsmart
lifeline or in the angle anchors for travspring™ and
travspring™ One lifelines.
The cornering post plate consists of 4 parts:
1) A plate
2) Two HM12×45 screws
3) Four M12 washers
4) Two lock nuts
Two types of plate are available depending on the
lifeline:
N1: travspring™ and travspring™ One
• Material: Stainless steel
• Net weight: 1.2 kg
N1
N2: travsmart
1: Galvanised steel
2, 3 and 4: Stainless steel
Net weight: 1.7 kg
50
2 3 4 1
342
273,5
Ø 13
N2
2 3
Ø 13
P – Pulley post on angle
"Important": The standard post for securing the
travspring™, travspring™ One and travsmart lifelines is
not part of the EC type examination certificates because
it has not been tested during the certification tests
carried out by the APAVE authorised body No. 0082
according to EN 795-C standards: 2012 and TS 16415-
C:2013. However, they have been tested by Tractel
mechanical strength to 60 kN in order to guarantee
compatibility in use as a structural anchor point for
these lifelines.
The angle pulley post is designed for terrace type
mounting on a concrete or metal support. It allows easy
creation of variable aperture angles
"Important": This post is only usable on the
travspring™ and travspring™ One lifelines.
The angle pulley post consists of 4 components:
1) A post
2) A pulley
3) A stirrup
4) An M16 screw.
• Material:
– 1: Galvanised steel
– 2: Cupro aluminium
– 3: Stainless steel and brass
– 4: Stainless steel
• Resistance: 60 kN
• Net weight: 17 kg
4 1
315
255
182
®
in