Samsung SINAMICS G130 Mode D'emploi page 1211

DDS (Drive Data Set)
p0186[0...n] (MDS number)
p0187[0...n] (enc 1 EDS number)
p0188[0...n] (enc 2 EDS number) <2>
p0189[0...n] (enc 3 EDS number) <2>
EDS (Encoder Data Set)
MDS (Motor Data Set)
<1> A BICO interconnection to a parameter which is part of a drive data set always influences the currently effective data set.
<2> Only for SINAMICS S120/S150.
1 2
DO: SERVO, VECTOR, TM41
Data sets - Drive Data Sets (DDS)
Copy DDS, source
p0819[0] (0)
Drive n
Drive 2
Drive 1
Select DDS bit 0
p0820[C]
(0)
Select DDS bit 1
DDS31
p0821[C]
(0)
Select DDS bit 2
DDS1
p0822[C]
(0)
DDS0
<1>
Select DDS bit 3
p0823[C]
(0)
Select DDS bit 4
p0824[C]
(0)
3 4
Copy DDS, target
p0819[1] (1)
Copy DDS, start
p0819[2] (0)
DDS number
p0180 (1)
5 6
fp_8565_54_eng.vsd
25.06.08 V04.05.00
Not relevant
Refer to [1020.7]
r0838
r0838[0] Motor data set MDS selected
r0049[1] Encoder 1 encoder data set EDS selected
r0838[2] Encoder 2 encoder data set EDS selected
r0838[3] Encoder 3 encoder data set EDS selected
DDS selected
r0837
r0837.0
r0837.1
r0837.2
r0837.3
r0837.4
A07530 "Drive data set does not exist"
DDS effective
r0051
r0051.0
r0051.1
r0051.2
r0051.3
r0051.4
r0049
r0049[0] Motor data set MDS effective
r0049[1] Encoder 1 encoder data set EDS effective
r0049[2] Encoder 2 encoder data set EDS effective
r0049[3] Encoder 3 encoder data set EDS effective
7 8
Function diagram
- 8565 -
S120/S150/G130/G150
<2>
<2>
<2>
<2>