Check Actuators On The Output Module - Aventics CANopen Mode D'emploi

AVENTICS | CANopen | R412005742–BDL–001–AD
7.5.3

Check actuators on the output module

Before commissioning, check the actuator function and the
O
method of operation using the LED displays on the output
module.
O O
O
O
O O
O
O O
Fig. 12: LED displays on the M8 output module (left) and M12 (right)
Table 22: Meaning of the LED display on the output module
LED Color Meaning
U Green Load supply U
Q1
Red Diagnosis: overload/short circuit of controlled
output O0, O1, O2 or O3
Off Load supply U
U Green Load supply U
Q2
Red Diagnosis: overload/short circuit of controlled
output O4, O5, O6 or O7
Off Load supply U
O0 to O7 Off Corresponding LOW level output
Yellow Corresponding HIGH level output
Commissioning and operation
O
available
Q1
not available (e.g. emergency OFF)
Q1
available
Q2
not available (e.g. emergency OFF)
Q2
127