Labeling The Module - Aventics CANopen Mode D'emploi

Bus coupler
Input/output modules
Fig. 6: Labels on the bus coupler (RMV04-CO), input module (8DI_M8), and output module (8DO_M8)
(examples)
AVENTICS | CANopen | R412005742–BDL–001–AD
Each input/output module extends the valve system by 60 mm
(60 x m). The E end plate has an installation depth of 18 mm.
6.2

Labeling the module

The address provided/used for the bus coupler is inscribed
O
on the bus coupler in the bus participant's (BTN) field.
Label the connections directly on the labels of the input/
O
output modules.
The markings on the connections indicate which labels are
assigned to the connections.
103
Assembly