Disassembly/Exchange; Exchanging The Bus Coupler - Aventics CANopen Mode D'emploi

130 AVENTICS | CANopen | R412005742–BDL–001–AD

Disassembly/Exchange

8 Disassembly/Exchange
You can either exchange the bus coupler or connect additional
input/output modules as needed.
The warranty from AVENTICS only applies to the delivered
configuration and extensions that have been taken into
account in the configuration. The warranty no longer
applies after a conversion that exceeds these extensions.
A bus coupler with 32 outputs can only be connected to a
VS that has been designed for 32 valve solenoids.
8.1

Exchanging the bus coupler

Applied electric voltage and high pressure
Danger of injury from electric shock and sudden pressure
drops.
Make sure that the system is not under voltage or
O
pressure!
CAUTION