Publicité
Les langues disponibles
Les langues disponibles
•
The maintenance, repair and troubleshooting work must be concluded with the verification of the correct
functioning and of all active safety devices.
•
When maintenance or repairs have been completed, the product can be started again only if duly
authorised by a maintenance technician, who must make sure that:
-
work has been completed;
-
the equipment works perfectly;
-
the safety devices are activated;
-
no one is working on the equipment.
4.15
ADDITIONAL PRECAUTIONARY REQUIREMENTS
CAUTION
Ensure that all personnel involved in the maintenance and use of the product are properly trained and
instructed in the correct safety and operating procedures.
Ensure that all personnel are aware of the residual risks present and indicated in par. 4.13
CAUTION
Never service the product while it is running.
CAUTION
Ensure that all safety devices are connected and in good working order. Never modify or bypass any of the
safety devices.
CAUTION
The
product
must be inspected before use and in any case after events such as: dropping or impact in order to
identify any damage.
CAUTION
Do not use the product indoors or in a potentially explosive environment.
-
The product may only be used by a properly trained and instructed operator who has read and
-
understood this manual.
Do not insert foreign objects into moving parts.
-
Always wear adequate and suitable personal protective clothing for the work to be carried out. Clothing
-
must be close-fitting to the body. Avoid wearing ties, necklaces or long untied hair that could get caught
in moving parts
A person under the influence of alcohol or taking drugs that reduce alertness or reflexes is not
-
authorised to use or interact with the product, nor to carry out maintenance or repair work.
The user is responsible for dangers or accidents to other persons or their property in the event of use not
-
in accordance with the instructions in this manual.
Inhaling atomised oil can cause irritation or intoxication of the operator's breathing system. In case of
-
prolonged problems a doctor has to be contacted.
To safeguard the operator's safety and avoid possible damage, it is essential to have read and
-
understood the entire use and maintenance manual before carrying out any work on the product. The
purpose of these instructions is to describe the operation of the product and its safe use as well as the
correct conditions in accordance with the regulations in force.
Following these instructions helps avoid dangerous situations, reduces repair costs and extends the life-
-
span of the product. This manual must be intact and legible in its entirety.
79
0310.0329 rev. 05
Publicité
