Publicité
Les langues disponibles
Les langues disponibles
Vibration level (**) With reference to EN ISO 5349-1 and 2, the total measurement
Tool combination
Continuous A-weighted sound pressure level at the operator's position (LpA) and sound power level of the tool (LwA),
both measured according to standard UNI EN ISO 3744:
(**) The frequency-weighted root mean square vibration values of the acceleration to which the hand-arm system is
exposed (for both lower and upper handle) are measured according to EN ISO 5349-1 and 2
ELECTROMAGNETIC COMPATIBILITY LEVEL
The machine contains electronic components subject to Electromagnetic Compatibility regulations, affected by
conducted and radiated emissions.
Emission values comply with regulatory requirements through the use of components that comply with the
Electromagnetic Compatibility Directive, suitable connections and installation in accordance with the requirements of
the component suppliers.
The machine therefore complies with the Electromagnetic Compatibility (EMC) directive.
2.3 REPRESENTATION OF AVAILABLE MODELS
This paragraph shows the possible and permitted combinations for the tool described in this manual.
Specifically, the only combinations allowed are:
a) Power unit (1-2) - Extension pole (2-3-4) - Harvesting head (5-6-7-8)
1 – POWER 58 PLUS power
unit
63
uncertainty value is assumed to be K = 0.3
1/2 - 3 – 6
1/2 - 4 – 6
1/2 - 5 – 6
1/2 - 3 – 7
1/2 - 4 – 7
1/2 - 5 – 7
1/2 - 3 – 8
1/2 - 4 – 8
1/2 - 5 – 8
1/2 - 3 – 9
1/2 - 4 – 9
1/2 - 5 - 9
3 – Fixed extension pole
4– Medium telescopic extension pole
Vibration level ahe
q
Lower handle
6.75 m/s²
6.69 m/s²
6.86 m/s²
6.02 m/s²
6.37 m/s²
6.25 m/s²
6.07 m/s²
5.91 m/s²
4.27 m/s²
4.64 m/s²
4.95 m/s²
7.16 m/s²
Products table
Vibration level ahe
q
Upper handle
6.32 m/s²
6.35 m/s²
6.48 m/s²
12.63 m/s²
9.26 m/s²
10.21 m/s²
6.00 m/s²
9.88 m/s²
7.53 m/s²
4.91 m/s²
8.90 m/s²
8.61 m/s²
6– Alice Head
7– Hercules Head
0310.0329 rev. 05
Publicité
