Publicité
Les langues disponibles
Les langues disponibles
DANGER
•
Before starting the product, ensure that the harvesting head and its teeth are not in contact with foreign bodies
or live parts.
•
Get into a stable and safe working position, which guarantees perfect balance (for example a flat and dry
surface).
•
Use the product, accessories, etc. in compliance with these instructions and considering the working
conditions and operations to be performed.
•
Always check before each use that the safety and command and control systems are in perfect working order.
•
Hold the tool handles (both power unit handle and extension pole handle) firmly with both hands.
•
Pay particular attention to the handles, which must always be dry, clean and free of oil residues, using the
PPE provided.
•
Pay attention to branches under tension, since they may cause loss of control of the tool due to a whiplash
effect.
•
Inhaling atomised oil and/or wooden dust may cause irritation or intoxication of the operator's breathing
apparatus. In case of prolonged ailments, consult a competent doctor.
•
Prevent any unintentional switch-on of the tool. When handling or carrying the tool, make sure that the switch
is at OFF position before connecting it to the power source (battery pack).
DANGER
During operation and maintenance of the product, use footwear, gloves and goggles or safety screen
DANGER
•
Do not carry the product by the power cable.
•
Disconnect the battery pack before carrying out any adjustments or routine and extraordinary maintenance.
•
When the product is not in use, turn off the ON/OFF switch to avoid unnecessary battery consumption
and/or component deterioration.
•
Carry the product by holding it with the harvesting head pointing backwards in any situation where the
product is not in use and with the power cable unplugged from the connector.
•
Before connecting the power cable, make sure that the connector has clean contacts (no dirt or other
obstructive material), that they are dry and free of oxidation.
•
Disconnect the connector from the power source before carrying out any adjustments or routine and
extraordinary maintenance.
•
Only use the product with the accessories specified by the Manufacturer.
•
Before any routine maintenance operations, read this manual carefully. For maintenance activities that are
not indicated in the manual, please contact the manufacturer's C.A.T. (Technical Assistance Centre).
•
Maintain all labels and pictograms on the product in a perfectly legible and undamaged condition, with
particular reference to those relating to danger and safety signs.
CAUTION
Before carrying out any maintenance or mechanical adjustment of the product, it is imperative to
wear PPE such as safety shoes, overalls, puncture-proof gloves and goggles to protect the face.
•
Any repair or maintenance work may only be carried out by duly trained personnel. Informed and instructed,
and authorised with the required professional profile (mechanical maintenance technician and/or electrical
maintenance technician) depending on the type of work to be carried out.
•
It is a mandatory requirement to disconnect the product from the power source before any adjustment
and/or maintenance work (battery pack).
•
During operation, maintenance and/or repair work, unauthorised persons must keep a distance of at least
5 metres from the operating range of the product.
•
The removal of protective or safety devices (where fitted) must only be carried out for extraordinary
maintenance operations and only by maintenance personnel, after disconnection of power sources. The
maintenance technician must ensure the safety of all personnel, also in order to avoid any damage to the
tool, as well as to restore the effectiveness of the equipment itself at the end of maintenance and always
before using again.
•
All the maintenance operations which are not described in this manual have to be performed by the
manufacturer's C.A.T.
78
0310.0329 rev. 05
Publicité
