CAMPAGNOLA POWER 58 Livret D'utilisation Et D'entretien page 100

The tool does not start
Excessive overheating
of the head (2).
Abnormal vibration of
the combs (1).
CAUTION!
All maintenance operations shall be carried out by a Mechanical Maintenance Technician.
9. SPARE PARTS
Ways of ordering spare parts:
To place an order for spare parts, please contact your Local Distributor or Dealer or a Campagnola Srl
Authorised Service Centre, stating the quantity and part number of the part you wish to order.
The spare parts list can be found on the Campagnola Srl manufacturer's website.
Or else, send a written request to:
specifying:
product serial number;
-
unit type as stated on the rating plate installed on the product. If absent, please describe the piece;
-
part number (found in the component manual);
-
description;
-
desired quantity.
-
10. ANNEXES
This chapter contains a list of the DOCUMENTS supplied with the product and form an integral part of this manual
provided by Campagnola Srl and should be used as a reference for the use, operation and maintenance of the
components themselves.
No. Annex
Annex 1
Annex 2
Annex 3
99
a) Incorrect assembly of the extension
pole with the power unit
a) Presence of dirt and/or wear on
internal rotating parts.
a) Wear of rotating parts.
b) Incorrect tightening of comb fixing
screws.
Campagnola S.r.l. Head Office and Plant
40069 ZOLA PREDOSA (BO) Italy
Via Lazio, 21,23,23/A e 23/B Tel. +39 051 753500
www.campagnola.it -
General Warranty Terms and Conditions
Machinery Directive Declaration of Conformity
Quick guide
Fax. +39 051 752551
star@campagnola.it
DESCRIPTION
a) Disassemble the extension pole and
check that the motor attachment is
inserted correctly into the pole
coupling.
a) Clean and service the head (2).
a) Clean and service the head (2).
b) Screw tightening.
MANUFACTURER
0310.0329 rev. 05
Campagnola
Campagnola
Campagnola