ENGLISH
QUICKIE IRIS
1.
Headrest
2.
Push Handle/Back Cane
3.
Armrest
4.
Footrest Hanger
5.
Footplate
6.
Carriage
7.
Caster Fork
NOTE: Not all options are available on both the Quickie and Zippie IRIS.
Please refer to the order form for specifi c option availability.
Sunrise Medical (US) LLC
2842 Business Park Ave,
Fresno, CA 93727
Type: Iris
Sunrise Medical GmbH
Manual
EC REP
Kahlbachring 2-4
Wheelchair
69254 Malsch-HD / Germany
136 kg
max 6° 560 mm 560 mm
The management system of SUNRISE MEDICAL is certifi ed to EN ISO 13485
and ISO 14001.
We at SUNRISE MEDICAL have been awarded the ISO-13485 certifi cate,
which affi rms the quality of our products at every stage, from R & D to pro-
duction. This product meets the requirements in accordance with EU and UK
regulations. Options or accessories shown are available at extra cost.
The varieties of fi tting variants, as well as the modular design, mean that it can
be used by those who cannot walk or have limited mobility because of:
- Paralysis - Loss of extremity (leg amputation)
- Extremity defect deformity - Joint contractures/joint injuries
- Illnesses such as heart and circulation defi ciencies, disturbance of equilibrium
or cachexia, Neurological disease patterns, Muscle dystrophy, Hemiplegia as
well as for elderly people who still have strength in the upper body.
The wheelchair shall not be used without attendant in case of:
- Perception disorder
- Imbalance
- Loss of both arms, if not supported by a caregiver
- Joint contracture or joint damage on both arms
- Seating disability
NOTE: General user advice. Not following these instructions may result in physical
injury, damage to the product or damage to the environment!
Notice to the user and/or patient: any serious incident that has occurred in relation to
the device should be reported to the manufacturer and the competent authority of the
Member State in which the user and/or patient is established.
255050 Rev. C
8.
Caster Tire
9.
Wheel Lock
10. 12-in Rear Wheel
11. Anti-tip
12. Adjustable Seat Pan
13. Tilt-in-space Mechanism
Release Lever
YYYY-MM-DD
ISO 7176-19:2008
IRS-#####
SN
MD
Sunrise Medical Limited
Thorns Road, Brierley Hill
West Midlands, DY5 2LD
UNITED KINGDOM
III. YOUR CHAIR AND ITS PARTS
TYPE:
Product Name/SKU Number
Maximum safe slope with anti-tip tubes fitted, Depends on
wheelchair setting, posture and physical capabilities of the user.
max X°
Seat width
XXX mm
Seat depth
XXX mm
kg
Max user weight
XXX kg
Maximum slope
max X°
UKCA Mark
CE Mark
Consult instructions for use
XXXX-XX-XX
Date of manufacture
Serial number
This symbol means Medical Device
Manufacturer's address
Crash tested according to
ISO 7176-19:2008
ISO 7176-19:2008
Importer's address
European Authorized Representative
UK Responsible Person
Swiss Representative's address
As the manufacturer, SUNRISE MEDICAL, declares that this
product conforms to the Medical Device Regulation (2017/745).
As the manufacturer, SUNRISE MEDICAL, declares that the
product conforms to the UK Medical Devices Regulation 2002 No.
618.
B4Me special adaptations
Sunrise Medical strongly recommends that in order to ensure that your B4Me product
operates, and performs as intended by the manufacturer; all the user information
supplied with your B4Me product is read and understood, before the product is first
used. Sunrise Medical also recommends that the user information is not discarded after
reading it, but it is kept safely stored for future reference.
Medical Device Combinations
It may be possible to combine this Medical device with one or more other Medical
Device or other product. Information on which combinations are possible can be found
at www.Sunrisemedical.co.uk. All combinations listed have been validated to meet the
General Safety and Performance Requirements, section 14.1 of the Medical Device
Regulation 2017/745.
Guidance on the combination, such as mounting, can be found at www.SunriseMedical.
co.uk.
4