Sunrise Medical Quickie IRIS Manuel D'instructions page 18

ENGLISH
R. ELEVATING LEGREST (optional)
1. Installation or Removal
To install or remove Elevating Legrest (ELR) see instructions for Swing-away Footrest installation.
2. Elevation Adjustment
a. To raise legrest, lift to desired position. Legrest will automatically lock in place.
b. To lower legrest, while seated in chair, press release lever (A) down and lower legrest to desired position.
Legrest will automatically lock in place.
S. ZFINITY ® FOOTREST SYSTEM
CAUTION– The Z-Finity® Footrest system is rated to 165lbs (75kg)
With the footrest system, Sunrise Medical offers either a single Flip-up Footplate (B), or dual footplates (C) that are able
to accommodate all of the possible heights and adjustment angles that the rider may require for their comfort and
support.
T. ZFINITY SWING-AWAY FOOTREST
®
The footrest system can also accommodate a swing-away hanger (D) with dual footplates (C) that are both height
adjustable and angle adjustable.
Swing-in-Swing-out Hangers and Footrests (80°)
1. Basic Footrest Installation
a. From the side, place the pivot (E) into the top of the frame tube which guides the hanger into the correct
alignment with the locking plate (F) on front frame tube.
b. Rotate the footrest towards the front of the chair until it locks into place on locking plate.
2. Removal
a. To remove footrest, release latch (G) by pulling lever upward or pushing lever downward.
b. Rotate footrest inward or outward and lift.
255050 Rev. C
23
24 25
25 26
18
VIII. USE AND MAINTENANCE
Elevating
Legrest
23
24
25
26