Sunrise Medical Quickie IRIS Manuel D'instructions page 35
Masquer les pouces
Voir aussi pour Quickie IRIS:
- Mode d'emploi (190 pages) ,
- Manuel d'utilisation et garantie (151 pages)
Publicité
Les langues disponibles
Les langues disponibles
IX. DEALER SERVICE AND ADJUSTMENT
HH. FOOTPLATE ADAPTER BRACKET
The footplate adapter bracket (A) can be installed by the dealer. The main purpose of this part is to allow for
height adjustment while using front mount footplates on a quick release hanger. The plate can be reversed which
adds to its range of adjustment.
1.
Footplate Height Adjustment
a.
Remove the hardware (B, C) and remove the footplate (D) and adapter plate assembly.
b.
Move the footplate (D) and assembly up or down to the desired position, using the "Front mount hang-
er setup" table, and (fi gure 62) as reference.
c.
Re-insert and tighten the hardware (B, C) to a torque of (96 in-lbs).
d.
Repeat the process for the other hanger and footplate.
NOTE– In most cases you will want to make sure the footplates are adjusted so that the height is the same on both
sides.
Hanger Option
Hole
1
70°
16-in
15-in
80°
16 1/2-in
15 1/2-in
90°
—
60
61
62
FRONT MOUNT HANGER SETUP
4-in Extension
2-in Extension
2
3
4
14-in
13-in
11 1/2-in
14 1/2-in
13 1/2-in
12-in
—
—
—
11 1/2-in
Standard Hanger Holes
5
6
7
10 1/2-in
9 1/2-in
9-in
11-in
10-in
9-in
10 1/2-in
9 1/2-in
8 1/2-in
35
ENGLISH
Footplate Adapter
8
9
10
11
8-in
7-in
6-in
8-in
7-in
6-in
7 1/2-in
6 1/2-in
5 1/2-in
60
61
62
255050 Rev. C
Publicité
