Understanding The Advanced Options - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 82
Area ON/OFF
Button
Program ON/OFF
Button
Therapy ON/OFF
Button
Note: Therapy ON/OFF Button is available on all screens.
To turn ON an area:
1. Ensure that the Area you wish to turn ON is occupied and has a non-zero amplitude.
2. Select
To turn OFF an area:
1. Select
Note: If you turn off a specific area, it becomes inactive and unavailable on the Remote Control.
Both the Program ON/OFF button and the Therapy ON/OFF button can be used to start and stop
stimulation for all active Areas in the current program.
To turn Therapy OFF for all active Areas:
1. Select
Therapy will stop for all Areas that are ON.
To turn Therapy ON for all active Areas:
2. Select
Caution: If any other device is used to turn Therapy OFF during programming,
turn the Therapy On/Off Button on the CP to OFF before resuming
programming. This will ensure that the CP is synchronized with the stimulation
status of the Stimulator.

Understanding the Advanced Options

In the Contour, Navigate, E-Troll, and FAST I3D programming modes, there are two Advanced Options
available: Resolution and Focus. Both are accessible by expanding the Advanced Options Tab.
ON
for the Area.
for the Area you wish to turn off.
or the Program
button.
or the Program
button.
Bionic Navigator™ 3D 4.0 Programming Manual
Programming the Patient
OFF
92395591-02 39 of 1595

Publicité

Table des Matières
loading

Table des Matières