Scope Of This Manual; Model Identification; Accessories; Accessories Supplied With The Indoor Unit - Rotex RKHBH016AB Manuel D'installation

P
H
3
4
1 Heat pump capacity
2 Required heating capacity (site dependent)
3 Additional heating capacity provided by the backup heater
4 Equilibriumtemperature (can be set through the user interface,
refer to "Field settings" on page 18)
T
Ambient (outdoor) temperature
A
P
Heating capacity
H
Domestic hot water tank (option)
An optional RKHW* domestic hot water tank with integrated 3 kW
electrical booster heater can be connected to the indoor unit. The
domestic hot water tank is available in one size only: 300 litre. Refer
to the domestic hot water tank installation manual for further details.
Drain pan kit (option)
For heating/cooling versions (RKHBX), it is necessary to install the
EKHBDP drain pan kit.
For more information concerning the drain pan kit, refer to
"Installation of the EKHBDP drain pan kit (only for RKHBX models)"
on page 9.
Remote alarm kit (option)
For information concerning the EKRP1HB remote alarm, refer to the
installation manual of that kit.
Connection to a benefit kWh rate power supply
This equipment allows for connection to benefit kWh rate power
supply delivery systems. Full control of the unit will remain possible
only in case the benefit kWh rate power supply is of the type that
power supply is not interrupted. Refer to "Connection to a benefit
kWh rate power supply" on page 14 for more details.

Scope of this manual

This installation manual describes the procedures for unpacking,
installing and connecting all RKHBH/X indoor unit models.
NOTE Installation of the RRHQ heat pump outdoor is
described in the outdoor unit installation manual.
Operation of the indoor unit is described in the indoor
unit operation manual.
Installation manual
2
Model identification
Indoor unit
1
2
T
A
Drain pan kit (optional)
A

Accessories supplied with the indoor unit

See figure 1
RK HB X 016 AB
Series
Indication of heating/cooling capacity (kW)
X = heating and cooling,
H = heating only
Hydro box
Rotex kit
(a) For exact values, refer to "Technical specifications" on page 29.
EK HB DP 150
Drain pan
Hydro box
European kit
CCESSORIES
1 Installation manual
2 Operation manual
3 Unpacking instruction sheet
4 Shut-off valve
5 Wall mounting bracket
6 Wiring diagram sticker (inside indoor unit cover)
7 Indoor unit cover fixing screw
8 Nylon washer
Indoor unit for air to water heat pump system
3 V3
Backup heater nominal
voltage:
V3 = 1P, 230 V
WN = 3P, 400 V
Backup heater capacity (kW)
(a)
RKHBH/X016AB
4PW50205-1A