Storz Techno Port 80407 Manuel D'utilisation page 74

3 Inbetriebnahme des
TECHNO PORT Monitors
3.13 Betriebsmodi und Menüführung
Level 9 functions
Level 9
Level 10 functions
Level 10
72
3
3.13 Operating modes and menu navigation
Image rotation:
Rotates the image on the screen by 180°. The setting is saved for this camera.
1 NOTE: This function is only activated if the camera connected supports this
function.
Key lock:
Allows the camera keys to be locked. The symbol changes (locks open) upon activation.
Pressing again serves to unlock the keys. The setting is saved for this camera.
1 NOTE: Not all cameras support this functionality.
Menu wheel:
Activates the control keys for the next level. You can move through several levels by
repeatedly pressing the menu wheel.
Level 1:
Back to Level 1.
Freeze function:
Pressing the 'Freeze function' control key (active camera symbol in the top right-hand
corner) changes the 'Single image capture' function (Level 1) to the Freeze function.
When the 'Single image capture' function is activated, the screen is frozen and, at the
same time, an image is saved. The setting is saved for this camera.
1 NOTE: This function is only activated if the camera connected supports this
function.
In order to deactivate the Freeze function, press the control key (active camera symbol
in the bottom left-hand corner) again. This function is only activated if the camera
connected supports this function.
Menu wheel:
Activates the control keys for the next level. You can move through several levels by
repeatedly pressing the menu wheel.
Level 1:
Back to Level 1.
Installing the
TECHNO PORT monitor