Publicité
Les langues disponibles
Les langues disponibles
Programming N678xA SMU Source Settings
Use the Source Settings window to access the specialized operating modes of the
Keysight N678xA SMU modules
Emulating Modes
The Emulating dropdown list lets you access the specialized operating modes of the Keysight N678xA
SMU. Press the Settings key to access the Source Settings window. Use the navigation keys to select
one of the emulating modes.
Information about the Voltage Measure Only and Current Measure Only modes is discussed under
N678xA SMU Meter-Only
Output Voltage and Current
Use the navigation keys to highlight the Voltage or Current fields. Then enter the voltage and current
values with the numeric keys. As previously explained in
and Current knobs to fine tune the values in these fields. Press Enter to enter the value.
As explained in subsequent sections, programming output voltage and current limit, or output current
and voltage limit, is determined by the Voltage Priority or Current Priority selection.
Voltage or Current Range - For outputs with multiple ranges, you can select a lower range if you need
better output resolution. Use the navigation keys to highlight the Range field. Press the Enter key to
access the dropdown range list. Use the navigation keys to select the desired output range.
Keysight N6705C User's Guide
Modes.
3 Using the Source/Load Functions
.
Turning the Unit
On, you can use the Voltage
87
Publicité
