Keysight N6705C Mode D'emploi page 184

5 Using the System Functions
Wake on I/O - check to activate the display with I/O bus activity. If Wake on I/O is enabled, the display
is restored whenever there is activity on the remote interface. This also resets the Wait timer.
Lock Voltage Knobs / Lock Current Knobs - check these to disable the front panel voltage or current
knobs. This is useful if you wish to prevent someone from changing the voltage or current settings if a
test is in progress. Uncheck to enable the voltage or current knobs.
Enable Front Panel Key Clicks check to enable key clicks. Uncheck to disable key clicks.
Default Meter View - in the dropdown, specify if the instrument turns on in single-output view or all-
outputs view.
Meter View Measurement N6700 Mode - check to synchronize the corresponding SCPI SENSe
measurement settings to the Meter View properties and vice versa. Refer to
Measurement Times for details.
Front Panel Lockout
You can password-protect the front panel keys to prevent unwanted control of the instrument from
the front panel. The lock setting and password is saved in non-volatile memory so that the front panel
remains locked even when AC power is cycled.
To access the front panel lockout function press the Menu key, scroll down and select Utilities, then
User Preferences, then Front Panel Lockout.
In the PIN text box, enter the numeric password that you wish to use to unlock the front panel. Then
click Enable Lock to lock the front panel keys. A dialog prompting the user to unlock the front panel
appears every time a key is pressed. Enter the password to unlock the front panel.
If the password is lost, the SYSTem:PASSword:FPANel:RESet command can reset the
front panel lockout password.
Clock Setup
When shipped from the factory, the power analyzer's clock is set to Greenwich mean time.
To access the clock function press the Menu key, scroll down and select Utilities, then User
Preferences, then Clock Setup.
184
Meter Ranges and
Keysight N6705C User's Guide