Publicité
Les langues disponibles
Les langues disponibles
5 Using the System Functions
Resetting the LAN
You can reset the LAN to the as-shipped settings by selecting Default Settings. This returns ALL LAN
settings to the as-shipped values and restarts networking. All default LAN settings are listed under
Non-volatile Settings in the Operating and Service Guide document.
You can also perform an LXI LCI reset by selecting LAN Reset. This resets the DHCP, DNS server
address configuration, mDNS state, mDNS service name and the web password. These settings are
optimized for connecting your instrument to a site network. They should also work well for other
network configurations.
Using the Web Interface
Your power analyzer has a built-in Web interface that lets you control it directly from the Web browser
on your computer. With the Web interface, you can access the front panel control functions including
the LAN configuration parameters. Up to six simultaneous connections are allowed. With multiple
connections, performance will be reduced.
The built-in Web interface only operates over the LAN. It requires a web browser.
The Web interface is enabled when shipped. To launch the Web interface:
1. Open the Web browser on your computer.
2. Enter the instrument's hostname or IP address into the browser's address field. The following
home page will appear.
3. Click on the Control Instrument tab on the top of the page to begin controlling your instrument.
4. For additional help about any of the pages, click on the ? icon.
194
Keysight N6705C User's Guide
Publicité
